Will this kit fit every Toyota Land Cruiser 70 Series

No; the product is configured for the submitted vehicle and wheel data; exact coverage cannot be confirmed from the 70 Series name alone

Does an 18 inch front wheel or 17 inch rear wheel guarantee fitment

No; wheel diameter is only the first reference; width, ET, inner barrel, spoke clearance, rotor dimensions, and the original brakes must also be checked

Is the VIN enough to approve the order

No; send the VIN together with the exact model, year, market, original brake setup, axle position, wheel measurements, clearance details, and requested rotor size

Can the rear electronic parking brake connect directly to my vehicle

Direct connection is not assumed; the controller, voltage, wiring, ECU, CAN, Auto Hold, diagnostic behavior, manual release, and parking hold requirements need a configuration specific review

Is the brake caliper kit plug and play

No blanket plug and play claim is made; possible requirements involving brackets, hoses, shields, the master cylinder, bleeding, brake balance, or EPB controls depend on the confirmed vehicle and kit

What braking improvement will the kit provide

No fixed stopping distance or fade reduction claim is made without configuration specific test evidence; buyers may request available test records that apply to the quoted setup before making a performance decision

What must be checked for local road use

The buyer and installer must confirm local inspection, registration, insurance, and road use requirements; the quotation does not create a general road legality claim

How do I start a quotation

Send the vehicle, VIN, original brake, wheel, clearance, axle, and rotor information listed above; we will use that record to define the configuration, included components, lead time, packing data, and order terms

SLP-LC70-GT6EPB-KIT Brand: steedluxparts Verified product data

Land Cruiser 70 caliper kit, GT6 Front and Rear EPB

Name: Land Cruiser 70 caliper kit, GT6 Front and Rear EPB
Brand: steedluxparts
SKU: SLP-LC70-GT6EPB-KIT
Price: 1488.00 USD
Availability: InStock

Land Cruiser 70 caliper kit with GT6 six piston front and rear EPB options, configured from VIN, original brakes, wheel clearance and rotor data

Aftermarket product. Vehicle and component brand names are trademarks of their respective owners. SteedLuxParts is not affiliated with, sponsored by, or endorsed by these brands. Brand names are used only to describe compatibility.

Unit price Quantity pricing updates automatically

$1,488.00 / unit 1-9 units price

Regular: ~~$1,588.00~~ 10-49 units price $1,388.00 / unit

View wholesale tier pricing Lower pricing for larger orders

1-9 units Sample or retail orders $1,488.00/ unit

10-49 units Small wholesale batch Recommended $1,388.00/ unit Save $100 per unit

50-199 units Core dealer volume $1,288.00/ unit Save $200 per unit

Brand	steedluxparts	Category	shop
SKU	SLP-LC70-GT6EPB-KIT	Minimum order quantity	1 units
Compatible Vehicles	Toyota Land Cruiser 70 Series custom application inquiry only, exact chassis code, model year, vehicle market and original brake setup require review	Year Range	Not verified, submit the model year, full VIN or chassis number and original vehicle market
Trim / Body Type / Variant	GT6 six piston front option and rear electromechanical EPB option, final package follows the approved fitment review	Original Brake Setup	Other / confirm
Hose / Connector / Interface	Brake hose port, bracket geometry, mounting hardware, shield clearance and hydraulic requirements must be confirmed for each application	Front / Rear Axle	Confirm by brake package
Installation Type	Confirm before order	Additional Setup Required	Depends on vehicle
Package Scope	Confirm by kit configuration	Brake Kit Notes	GT6 front: 18 inch with 345 or 355 mm rotors; 19 inch with 355 or 380 mm rotors; 20 inch with 380 or 405 mm rotors; 21 inch with 405 mm rotors. Rear EPB: 17 inch with 330 mm rotors; 18 inch with 355 mm rotors; 19 inch with 355 or 380 mm rotors; 20 inch with 380 or 400 mm rotors. Final fitment requires VIN, original brake and measured wheel-clearance review.
Included Brake Parts	Brake calipers x2; brake pads x4; custom rotor hats x2; custom caliper mounting brackets x2; brake hoses x2; brake rotors x2; brake fluid x1 when included for the selected product version	Warranty	12 months
Packaging	Standard export packaging	Carton Size	45 x 45 x 45 cm
Gross Weight	45 kg	MOQ	1 units

Land Cruiser 70 caliper kit orders are configured around the vehicle, the original brake setup, and the available wheel space, rather than a broad model name alone; the front option uses a GT6 six piston caliper, while the rear option uses an electromechanical caliper with an electronic parking brake; you may request the front kit, the rear kit, or a quoted combination after the required fitment review

This is a custom brake upgrade for buyers who can provide complete vehicle and wheel information before production; a VIN helps identify the vehicle, but it does not confirm caliper clearance inside an aftermarket wheel; we also need the exact model and production year, the original brake configuration, the axle position, the requested rotor size, and detailed wheel measurements; final selection is confirmed for the submitted configuration only

Choose the front or rear brake upgrade

GT6 six piston front brake caliper kit

The GT6 front option is considered for wheels from 18 inch upward, using the wheel and rotor references below; these combinations are selection starting points supplied for this product; they are not a fitment guarantee; wheel width, ET, inner barrel shape, spoke profile, rotor dimensions, and the original front brake setup still need to be checked

Rear electromechanical EPB brake caliper kit

The rear option combines an electromechanical caliper with an electronic parking brake function; it is considered for wheels from 17 inch upward using the listed rotor references; electronic integration must be reviewed separately for the vehicle; no assumption is made about direct compatibility with the ECU, CAN communication, Auto Hold, diagnostic functions, controller, wiring, or manual release system

Axle option	Wheel diameter	Rotor diameter reference
GT6 front	18 inch	345 or 355 mm
GT6 front	19 inch	355 or 380 mm
GT6 front	20 inch	380 or 405 mm
GT6 front	21 inch	405 mm
Rear EPB	17 inch	330 mm
Rear EPB	18 inch	355 mm
Rear EPB	19 inch	355 or 380 mm
Rear EPB	20 inch	380 or 400 mm

The table does not mean that every Land Cruiser 70 Series vehicle with the stated wheel diameter will accept the kit; rotor thickness, offset, PCD, center bore, hat dimensions, caliper position, and actual wheel clearance remain part of the final review

Land Cruiser 70 caliper fitment begins with complete data

Send the following information with your inquiry so the Land Cruiser 70 brake caliper kit can be assessed against the vehicle you intend to modify

Exact vehicle model, production year, sales market, and VIN
Clear photos and available measurements of the original front and rear brake configuration
Required axle position, front, rear, or both
Wheel diameter, wheel width, ET, and wheel model
Inner barrel measurements and the available axial and radial spoke clearance
Requested rotor diameter, plus rotor thickness and offset when known
PCD, center bore, and relevant rotor hat dimensions when available
Photos of the wheel face, inner barrel, spokes, hub area, and existing brakes

Incomplete data can delay the quotation or leave a clearance risk that cannot be resolved from the model name, VIN, or wheel diameter alone; for a modified wheel, measurements must represent the wheel that will actually be used with the brake upgrade

Why wheel diameter alone cannot confirm clearance

Two wheels with the same nominal diameter can have different barrel shapes, widths, offsets, and spoke profiles; a wheel may have enough radial room around the rotor but insufficient space between the caliper and the spokes; changes in ET can also move the spokes closer to the caliper; for this reason, an 18 inch wheel does not automatically clear the GT6 front option, and a 17 inch wheel does not automatically clear the rear EPB option

The quotation should record the wheel and rotor data used for selection; the installer must check physical clearance before final assembly and again after the wheel is mounted; any proposed spacer, wheel change, or other clearance measure needs a separate safety and local compliance review

Kit contents and order details

The quoted set includes two brake calipers, four brake pads, two custom rotor hats, two custom caliper mounting brackets, two brake hoses, and two brake rotors. One pack of brake fluid is included when it applies to the selected version. The gross weight is 45 kg and the carton size is 45 x 45 x 45 cm. MOQ is one set, production normally takes 10 to 25 days after the configuration is approved, the warranty is 12 months, and standard export packaging is used.

For owners, workshops, dealers, and distributors

One set can be quoted for an individual project, while workshops and B2B buyers can submit multiple vehicle configurations for review; each configuration needs its own fitment record, especially when model years, original brakes, wheels, or axle requirements differ; this makes the quotation easier to verify and reduces uncertainty before repeat orders

Workshops should request the applicable installation information and the replacement pad and rotor references with the quotation; before placing a repeat or wholesale order, confirm that future pad and rotor supply matches the selected configuration and target market; packaging, labeling, order quantity, and delivery schedule should also be agreed in the sales document

Installation must be handled by a qualified brake technician; the installer is responsible for checking bracket alignment, rotor position, brake hose routing, shield clearance, wheel clearance, hydraulic operation, bleeding, and front to rear brake behavior; any effect on the master cylinder, booster, ABS, or load sensing proportioning valve requires a vehicle specific assessment; rear EPB installation also requires confirmation of the electrical control and diagnostic scope

Custom application available

Not limited to the listed vehicle

The vehicle named on this product page is a reference application, not the only possible application. For another vehicle, send the VIN and wheel size first. We can review a custom brake kit configuration, then confirm the original brake setup, rotor dimensions and measured wheel clearance before approval.

VIN ID WHEEL ROTOR AXLE

Fitment review required

01[INPUT]

VIN & Vehicle

Identify the exact model, year, market and original brake package.

02[REVIEW]

Wheel Size & Clearance

Check diameter, width, ET, inner barrel and spoke clearance.

03[MATCH]

Rotor & Mounting

Confirm rotor dimensions, axle position, bracket and hose interface.

04[CUSTOM]

Kit Configuration

Prepare the application-specific caliper, rotor and installation package.

Detailed fitment checklist VIN, vehicle details and wheel information are usually enough to begin the fitment review

To start a fitment review, please send the following basic information:

Vehicle make and model
Model year
Full 17-digit VIN
Wheel diameter and size
Whether the wheels are original factory wheels or aftermarket wheels
Wheel width and offset or ET, especially for aftermarket wheels
Any wheel spacers, suspension changes, hub conversions or existing brake modifications

With this information, our team can normally identify the original vehicle and brake specification, then review the likely rotor, mounting and wheel-clearance requirements. We can then advise whether this six-piston front brake kit is a suitable modification candidate for the vehicle.

If the VIN or wheel data is insufficient, we may request clear brake photos, rotor measurements or wheel-clearance details before final approval. Fitment is confirmed only after the relevant brake and wheel information has been reviewed.

Wheel diameter is only an initial screening input. Final compatibility still depends on the vehicle, original brake setup, rotor dimensions and measured wheel clearance.